BC | B22 | Bayonet Cap Brass Un-Switched Lampholder With 10mm Fixing
This product is perfect for a quick fix, the Brass BC | B22 | Bayonet cap lampholder comes with a 25mm long threaded rod with a 25mm washer and a steel nut.
Ideal for fixing onto a metal item, comes in the 10mm thread, so you can easily add additional washers or nuts if required.
You can cut the threaded rod down with a hacksaw easily for those lamp bases with not a lot of room. Once the lampholder is screwed onto the thread, you have 20mm of thread to play with.
Ideal for the following items:
This lampholder will require a 3 core cable as it's metal and will need to be earthed.
You can install a lampshade onto this lampholder.
The lampholder has a thread lock, meaning inside the cap (bottom section) of the lampholder is a screw that once installed onto the threaded rod and tightened up it will lock the cap to the thread, this means there will be no movement once fully installed.
Spec:
This product is perfect for a quick fix, the Brass BC | B22 | Bayonet cap lampholder comes with a 25mm long threaded rod with a 25mm washer and a steel nut.
Ideal for fixing onto a metal item, comes in the 10mm thread, so you can easily add additional washers or nuts if required.
You can cut the threaded rod down with a hacksaw easily for those lamp bases with not a lot of room. Once the lampholder is screwed onto the thread, you have 20mm of thread to play with.
Ideal for the following items:
- Wooden Base: If you have a wooden item, you can remove the washer and nut and glue/tap in the threaded rod into the wooden base.
- Ceramic Base: For ceramic bases ideally you would want an additional rubber washer SKU: 21272 and maybe an additional metal washer SKU: 7202 and nut SKU: 81852
- Metal Base: As long as you have an approx. 10mm hole then you can use this as is simply pop the lampholder with thread into the hole, use the washer + nut to tighten to the metal fixing.
This lampholder will require a 3 core cable as it's metal and will need to be earthed.
You can install a lampshade onto this lampholder.
The lampholder has a thread lock, meaning inside the cap (bottom section) of the lampholder is a screw that once installed onto the threaded rod and tightened up it will lock the cap to the thread, this means there will be no movement once fully installed.
Spec:
- Lamp Cap: BC | B22 | Bayonet Cap
- Height: 48.5mm
- Diameter: 32mm
- Thread: 10 x 20mm (once screwed into the lampholder)
- Min Shade Hole Size: 26mm
- Max Shade Hole Size: 32mm
- Max Wattage: 60w
- Material: Brass
