ES | E27 | Edison Screw Black Threaded Lampholder with Pull Cord 2194877
If you are looking for a pull cord on a E27 lampholder then this one should fit the bill.
This E27 Lampholder With Pull Cord has an on/off switch inside the base of the lampholder and a White cord which is 150mm long operating the switch.
This lampholder contains a switch inside. Please note that this lampholder does not contain an earth terminal in the cap.
Threaded skirt allows for a 40mm diam. shade to be fitted but you do need 2 shade rings. (Shade rings not included)
Before you screw this lampholder together make sure you can see how the locking system works so you can un screw it if needed.
Please see the following guide on how to install this lampholder.
The manufacturer of ES | E27 | Edison Screw Black Threaded Lampholder with Pull Cord 2194877 is Arditi, who started in Brembilla, Italy and is one of the UKs leading manufacturers of specialised lighting components. They were founded in 1960, and now have over 50 years’ experience in the lighting industry. They supply beautiful products which are certified according to IEC, US, UL and CSA technical standards. They are also ISO 9001 compliant, Arditi is the ideal supplier for our ES | E27 | Edison Screw Black Threaded Lampholder with Pull Cord 2194877.
Please Note: This lampholder has no earth connection.
Spec:
Cap: ES | E27 | Edison Screw
Height: 67mm
Diameter: 40mm
Thread Entry: 10mm
Max Wattage: 60w
Cord Length: 150mm - 140mm after installation.
Material: Thermoplastic
CE Approved
If you are looking for a pull cord on a E27 lampholder then this one should fit the bill.
This E27 Lampholder With Pull Cord has an on/off switch inside the base of the lampholder and a White cord which is 150mm long operating the switch.
This lampholder contains a switch inside. Please note that this lampholder does not contain an earth terminal in the cap.
Threaded skirt allows for a 40mm diam. shade to be fitted but you do need 2 shade rings. (Shade rings not included)
Before you screw this lampholder together make sure you can see how the locking system works so you can un screw it if needed.
Please see the following guide on how to install this lampholder.
The manufacturer of ES | E27 | Edison Screw Black Threaded Lampholder with Pull Cord 2194877 is Arditi, who started in Brembilla, Italy and is one of the UKs leading manufacturers of specialised lighting components. They were founded in 1960, and now have over 50 years’ experience in the lighting industry. They supply beautiful products which are certified according to IEC, US, UL and CSA technical standards. They are also ISO 9001 compliant, Arditi is the ideal supplier for our ES | E27 | Edison Screw Black Threaded Lampholder with Pull Cord 2194877.
Please Note: This lampholder has no earth connection.
Spec:
Cap: ES | E27 | Edison Screw
Height: 67mm
Diameter: 40mm
Thread Entry: 10mm
Max Wattage: 60w
Cord Length: 150mm - 140mm after installation.
Material: Thermoplastic
CE Approved
