SES | E14 | Small Edison Screw Threaded White ABS Plastic Lampholder with L Bracket
This lampholder is perfect for replacing wall light lampholders where the lampholder is fixed to the fitting or the wall directly using an L bracket.
The bracket can be installed either way around for additional flexibility.
This lampholder is to be used with a 2 core cable, if you have a 3 core cable, please contact us or seek professional advice on if this will work for your needs.
Comes with 2x shade rings in case you need to use them to hold a shade into position, in most cases these will not be required, but they are included in case you do need them.
It also features a cord grip to ensure the cable does not move after installation has taken place, this also holds the L bracket into position.
The lampholder has a screw style connection unit to connect the cables to the lampholder itself, there are versions out there that are push wire, this does the exact same job just required a screwdriver to install.
Products in this kit:
Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Max Wattage: 60w
Height: 53.5mm excluding cord grip
Height: 65mm including cord grip
Diameter: 28mm
Depth (once fixed to a wall): 39mm with shade rings
Depth (once fixed to a wall): 35mm without shade rings
Max Shade Hole Size: 31mm
Material: Thermoplastic Resin
Max 190°C Working Temperature Rating
This lampholder is perfect for replacing wall light lampholders where the lampholder is fixed to the fitting or the wall directly using an L bracket.
The bracket can be installed either way around for additional flexibility.
This lampholder is to be used with a 2 core cable, if you have a 3 core cable, please contact us or seek professional advice on if this will work for your needs.
Comes with 2x shade rings in case you need to use them to hold a shade into position, in most cases these will not be required, but they are included in case you do need them.
It also features a cord grip to ensure the cable does not move after installation has taken place, this also holds the L bracket into position.
The lampholder has a screw style connection unit to connect the cables to the lampholder itself, there are versions out there that are push wire, this does the exact same job just required a screwdriver to install.
Products in this kit:
- Lampholder
- L Bracket
- Cord Grip
Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Max Wattage: 60w
Height: 53.5mm excluding cord grip
Height: 65mm including cord grip
Diameter: 28mm
Depth (once fixed to a wall): 39mm with shade rings
Depth (once fixed to a wall): 35mm without shade rings
Max Shade Hole Size: 31mm
Material: Thermoplastic Resin
Max 190°C Working Temperature Rating
