Wooden Base Lamp Kit 8 with Nickel Un-Switched Lampholder
Use a Lamp Kit 8 to turn a Wooden Base into a Light with a Lampholder and a Cord Set with In-Line Switch on the Flex using a Wood Nipple screwed into the wood to fix the lampholder.
Lamp Kit 8 provides a kit of parts including a Un-Switched Lampholder, a Wood Nipple and a 3-Core flex with a moulded switch and plug.
You can use this Lamp Kit 8 if you there is a flat top to the wooden base with a minimum diameter of 15mm. However great care will be needed if the wooden area is very small as the wood nipple may split the wood. The lampholder is fixed to the wood nipple and sits flush on the wood.
The flex will need to come out the bottom of this Lamp Kit 8 where a cord grip can be fitted across the flex.
Please Note: No Light bulb or piece of wood included they are for picture reference only.
Spec:
- Cable Length: 2.5m
- Distance from switch to unwired end: 800mm
- Lampholder: BC | B22 | Bayonet Cap
PLEASE NOTE: If selecting the gold cable colour option - the gold cable now has a white plug instead of the gold one shown in the images. This is due to a temporary change in supplier, see below for the new gold 3 core cable with a white plug.
